TP-Link T2500G-10TS - 4.3 System Tools

27

User Table
Select:
Select the desired entry to delete the corresponding user
information. It is multi-
optional The current user information
can’t be deleted.
User ID, Name and
Access Level:
Displays the current user ID, user name and access level.
Operation: Click the Edit
button of the desired entry, and you can edit the
corresponding user information. After modifying the settings,
please click the Modify button to make the modification
effective. Access level and user status of the current user
information can’t be modified.
4.3 System Tools
The System Tools function, allowing you to manage the configuration file of the switch, can be
implemented on Boot Config, Config Restore, Config Backup, Firmware Upgrade, System
Reboot and System Reset pages.
4.3.1 Boot Config
On this page you can configure the boot file of the switch. When the switch is powered on, it will
start up with the startup image. If it fails, it will try to start up with the backup image. If this fails
too, you will enter into the bootutil menu of the switch.
Choose the menu System → System Tools → Boot Config to load the following page.
Figure 4-13 Boot Config
The following entries are displayed on this screen:

Boot Table
Select:
Select the unit(s).
Current Startup
Image:
Displays the current startup image.
Next Startup Image:
Select the next startup image.
Backup Image:
Select the backup boot image.