TP-Link T2500G-10TS - Page 45

35

CipherSuite Config
RSA_WITH_RC4_128_MD5: Key exchange with RC4 128-
bit encryption and
MD5 for message digest. By default, it’s enabled.
RSA_WITH_RC4_128_SHA: Key exchange with RC4 128-
bit encryption and
SHA for message digest. By default, it’s enabled.
RSA_WITH_DES_CBC_SHA: Key exchange with DES-
CBC for message
e
ncryption and SHA for message digest. By
default, it’s enabled.
RSA_WITH_3DES_EDE_CBC_SHA: Key exchange with 3DES and DES-EDE3-
CBC
for message encryption and SHA for message
digest. By default, it’s enabled.

Session Config
Session Timeout: If you do not
hing with the Web management page within the
timeout time, the system will log out automatically. If you want to
reconfigure, please login again.

Access User Number
Number Control:
Select Enable/Disable the Number Control function.
Admin Number: Enter th
e maximum number of the users logging on to the Web
management page as Admin.
Guest Number:
Enter the maximum number of the users logging on to the Web
management page as Guest.

Certificate Download
Certificate File: Select the desired certificate to do
wnload to the switch. The
certificate must be BASE64 encoded.

Key Download
Key File:
Select the desired key to download to the switch. The key must
be BASE64 encoded.
Note:
1. The SSL certificate and key downloaded must match each other; otherwise the HTTPS
connection will not work.
2. To establish a secured connection using https, please enter https:// into the URL field of
the browser.
3. It may take more time for https connection than that for http connection, because https
connection involves authentication, encryption and decryption etc.