TP-Link T2500G-10TS - Telnet Config

42
After successful authentication, please enter the login user name. If you log on to the switch
without entering password, it indicates that the key has been successfully downloaded.
4.4.5 Telnet Config
On this page you can Enable/Disable Telnet function globally on the switch.
Choose the menu System→Access Security→Telnet Config to load the following page.
Figure 4-23 Access Control
The following entries are displayed on this screen:

Global Config
Telnet:
Select Enable/Disable Telnet function globally on the switch.
Return to CONTENTS