TP-Link T2500G-10TS - Protocol Group

77
Choose the menu VLAN→Protocol VLAN→Protocol Group Table to load the following page.
Figure 6-8 Create Protocol VLAN
The following entries are displayed on this screen:

Protocol Group Table
Select:
Select the desired entry. It is multi-optional.
Protocol Name:
Displays the protocol of the protocol group.
VLAN ID:
Displays the corresponding VLAN ID of the protocol group.
Member:
Displays the member of the protocol group.
Operate:
Click the Edit button to modify the settings o
f the entry. And click
the Apply button to apply your settings.
6.3.2 Protocol Group
On this page, you can configure the Protocol Group.
Choose the menu VLAN→Protocol VLAN→Protocol Group to load the following page.
Figure 6-9 Create and View Protocol Template
The following entries are displayed on this screen:

Protocol Group
Protocol:
Select the Protocol type.
VLAN ID:
Enter the ID number of the Protocol VLAN. This VLAN should be
one of the 802.1Q VLANs the ingress port belongs to.