TP-Link T2600G-28TS - Page 329

317
Choose the menu LLDP→Device Info→Local Info to load the following page.
Figure 15-3 Local Information
The following entries are displayed on this screen:

Auto Refresh
Auto Refresh: Enable/Disable the auto refresh function.
Refresh Rate: Configure the auto refresh rate.

Local Info
Select the desired port to display the information of the corresponding port.
Local Interface: Displays the local port number.
Chassis ID Subtype
：
Indicates the basis for the chassis ID, and the
default subtype is
MAC address.
Chassis ID
：
Indicates the specific identifier for the particular chassis in local
device.
Port ID Subtype
：
Indicates the basis for the port ID, and the default subtype is
interface name.