84
Choose the menu VLAN→VLAN VPN→VLAN Mapping to load the following page.
Figure 6-14 Create VLAN Mapping Entry
The following entries are displayed on this screen:
Global Config
VLAN Mapping:
Enable/Disable the VLAN mapping function. Enable/Disable the
VLAN mapping function. If VLAN mapping is disabled and VLAN
VPN is enabled, the packet will be
encapsulated with an outer tag
according to the PVID of its arriving port.
VLAN Mapping Config
Port: Select/Input the port number.
C VLAN:
Enter the ID number of the Customer VLAN. C VLAN refers to the
VLAN to which the packet received by switch belongs.
SP VLAN: Enter the ID number of the Service Provider VLAN.
Name: Give a name to the VLAN Mapping entry or leave it blank.
VLAN Mapping List
Select:
Select the desired entry to delete the corresponding VLAN
Mapping entry. It is multi-optional.
Operation: Click the Edit button to modify the settings of the entry.
Click Edit to display the following figure:
To Next Page
Loading...
