165
T2700G-28TQ#show system-time dst
show system-time ntp
Description
The show system-time ntp command is used to display the NTP mode
configuration information.
Syntax
show system-time ntp
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the NTP mode configuration information of the switch:
T2700G-28TQ#show system-time ntp
show system-info
Description
The show system-info command is used to display system description, system
name, device location, system contact, hardware version, firmware version,
system time, run time and so on.
Syntax
show system-info
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the system information:
T2700G-28TQ#show system-info
To Next Page
Loading...
