TP-Link T2700G-28TQ - Chapter 35 DHCP Server; service dhcp; ip dhcp server exclude-address

T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
276
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the LLDP configuration of Gigabit Ethernet port 1/0/1:
T2700G-28TQ#show lldp interface gigabitEthernet 1/0/1
show lldp local-information interface
Description
The show lldp local-information interface command is used to display the
LLDP information of the corresponding port. By default, the LLDP information of
all the ports will be displayed.
Syntax
show lldp local-information interface [ fastEthernet port | gigabitEthernet
port | ten-gigabitEthernet port ]
Parameter
port —— The Fast/Gigabit/Ten-Gigabit Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the LLDP information of Gigabit Ethernet port 1/0/1:
T2700G-28TQ#show lldp local-information interface gigabitEthernet 1/0/1
show lldp neighbor-information interface
Description
The show lldp neighbor-information interface command is used to display
the neighbor information of the corresponding port. By default, the neighbor
information of all the ports will be displayed.
Syntax
show lldp neighbor-information interface [ fastEthernet port |
gigabitEthernet port | ten-gigabitEthernet port ]