TP-Link T2700G-28TQ - Show Ip Proxy-Arp

T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
311
Syntax
ip proxy-arp enable default-route
no ip proxy-arp enable default-route
Command Mode
Global Configuration Mode
Example
Enable the default-route-searching function when searching for the ARP proxy:
T2700G-28TQ(config)# ip proxy-arp enable default-route
show ip proxy-arp
Description
The show ip proxy-arp command is used to display the Proxy ARP status.
Syntax
show ip proxy-arp
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the Proxy ARP status:
T2700G-28TQ(config)# show ip proxy-arp