TP-Link T2700G-28TQ - Page 383

T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
363
Parameter
interface —— Display the RIP interface basic information.
database —— Display the RIP routing table. To display the routing information
of a specified RIP interface, please specify its IP address and subnet mask.
ip-address —— The IP address of which you desire to show the routing
information.
mask —— The subnet mask of which you desire to show the routing
information.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the RIP routing information of the network 192.168.1.0/24:
T2700G-28TQ(config)# show ip rip database specify 192.168.1.0
255.255.255.0