TP-Link Tapo RV30C Plus - Brush and Wheel Maintenance

Tapthe button and start recording your own alarm sound for up to X seconds.
Clean the Main Brush Clean the Side Brush
1. Turn the robot vacuum
over, then unlatch and
remove the main brush
cover.
1. Pull rmly to remove the side brush and remove any entangled
debris. Wipe with a damp cloth if needed.
2. Remove the brush and
its end cap.
3. Remove any hair or
debris with the
cleaning brush.
4. Re-install the cap and
main brush. Press on
the main brush cover to
lock it in place.
2. Re-install the side brush and press it tightly to ensure it is
installed in place.
11