TP-Link Tapo RV30C Plus - Overview; Robot Vacuum Controls and Indicators

Overview
Robot Vacuum
Power/Clean
Combination Button
• Press once: Start/pause cleaning.
• Press and hold for 5 seconds: Turn on/o the robot vacuum.
• Press and hold simultaneously for 5 seconds:
Enter setup mode to congure network.
• Press and hold simultaneously for 10 seconds:
Restore to factory default settings.
• Return to the dock to charge.
• Empty the bin when docked.
Dock
• Press once: Start spot cleaning.
• Press and hold for 5 seconds: Turn on/o the child lock.
Spot Cleaning/Child Lock
*For the rst use, slide the power switch from OFF to ON to turn on.
LED
• Red: Battery level < 20%; Error
• Orange: Battery level between 20% and 80%
• Green: Battery level > 80%
2