7
Step 7 : Click on Add.
Step 8 : Click on IPsec Policy, enter Policy Name whatever you like, the Mode should be LAN-
to-LAN. Enter Local Subnet and Remote Subnet.
Step 9 : Select WAN you use and type in Remote Gateway. In this example, the Remote
Gateway is Router B’s WAN IP address, 218.18.1.208.
Step 10 : Look for Policy Mode and select IKE.
Step 11 : Under IKE Policy, we select test1 which is used.
Step 12 : Under IPsec Proposal, we use ipsec1 in this example.
To Next Page
Loading...
