10
Step 4 : DH Group, select DH2, the same with Router A.
Step 5 : Enter Pre-share Key and SA Lifetime, make sure that they are the same with Router
A.
Step 6 : Click on Save.
Step 7 : Click on IPsec on left side, click on Add New.
Step 8 : Enter Policy Name, we use ipsec2 in this example.
Step 9 : Enter Local Subnet and Remote Subnet, and then enter Remote Gateway, it’s Router
A’s WAN IP address, 218.18.0.233.
To Next Page
Loading...
