36
C. Configuring a PPTP Server on TP-LINK router
Step 1 : Access Router A’s management page, click on VPN->L2TP/PPTP->IP Address Pool,
enter Pool Name and IP Address Range, and then click on Add.
NOTE: IP Address pool must be different range from LAN IP address range.
Step 2 : Go to L2TP/PPTP Tunnel, look for protocol, select PPTP; the Mode should be Server.
Step 3 : Enter Account Name and Password whatever you like, here we use “pptp” as
account name, password is “pptp”.
To Next Page
Loading...
