TP-Link TL-ER6120 - Page 38

38
3) Keep using the default gateway on remote network on clients.
Step 2 : Go to L2TP/PPTP Tunnel, look for protocol, select PPTP; the Mode should be Server.
Step 3 : Enter Account Name and Password whatever you like, here we use “pptp” as
account name, password is “pptp”.
Step 4 : Under Tunnel, select LAN-to-LAN.
Step 5 : Under IP Address Pool, select “VPN” we have added before.
Enter subnet and mask
Click
on
Save
Click
on
Add
DNS setting is not necessary, it can be kept as default
Enter Account Name
and Password
Select LAN-to-LAN
Enter
Router B’s
local
subnet
Click
on
Add