TP-Link TL-ER6120 - Application Examples; Network Requirements and Topology

Figure 3-87 Diagnostics
The following items are displayed on this screen:
 Ping
Destination IP/Domain:
Enter destination IP address or Domain name here.
Then select a
port for testing, if you select “Auto”, the r
outer will select the
interface of destination automatically. After clicking <Start>
button,
the router will send Ping packets to test the
network connectivity
and reachability of the host
and the results will be displayed in the
box below.
 Tracert
Destination IP/Domain:
Enter destination IP address or Domain name here.
Then select a
port for testing, if Auto is selected, the router
will select the interface
of destination automatically. After clicking the <Start>
button, the
router will send Tracert packets to
test the connectivity of the
gateways during the
journey from the source to destination of the
test data and the results will be displayed in the box below.
-118-