3.7.5.2 Online Detection
On this page, you can detect the WAN port is online or not.
Choose the menu Maintenance→Diagnostics→Online Detection to load the following page.
Figure 3-88 Online Detection
The following items are displayed on this screen:
General
Port: Select the port to be detected.
Detecting:
Activate or inactivate Online Detection function. When Online Detection is
active,
WAN status will depend on the result of both PING and DNS
Lookup. When Online Detection is inactive,
WAN status will be detected
according to physical connection status and dial-up status.
Mode: Detect automatically or Manually. In Auto mode, gateway will be selected
as destination for PING detection, DNS server of WAN port will be
selected as destination for DNS Lookup. In Manual M
configure the destination for PING and DNS Lookup manually.
Ping: Enter the destination IP for Ping in Manual mode. 0.0.0.0
detection is disabled.
DNS Lookup: Enter the IP address of DNS server in Manual mode. 0.0.0.0 means DNS
Lookup is disabled.
List of WAN status
Port: Displays the detected WAN port.
Detection: Displays whether the Online Detection is enabled.
WAN Status: Display the detecting results.
3.7.6 Time
3.7.6.1 Time
System Time is the time displayed while the router is running. On this page you can configure the system
time and the settings here will be used for other time-based functions like Access Rule, PPPoE and
Logs.
-119-
To Next Page
Loading...
