EasyManua.ls Logo

TP-Link TL-MR3220 - Resetting Router to Factory Defaults

TP-Link TL-MR3220
195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
English
3) Select Internet Protocol (TCP/IP) in Windows XP/2000 or
Internet Protocol Version 4 (TCP/IPv4)in Windows Vista/7. Then
click “Properties”.
4) Select Obtain an IP address automaticallyand Obtain DNS
server address automatically”. Then click “OK”.
T3. What should I do if I cannot get Internet access with an
identied 3G/4G USB modem?
Please insert a suited SIM/UIM card into the 3G/4G USB modem 1)
correctly.
Please plug your 3G/4G USB modem directly into your PC and 2)
disable the PIN verication via modem utility.
Please verify that your Internet connection is working on your PC.3)
Ask your ISP for the latest dial number and APN, correct the pre-set 4)
information manually.
T4. What should I do when the Unknown Modem message
displays?
Please go to our website: 1) www.tp-link.com, click the tab Support
and select 3G/4G USB Modem Compatibility List”. Please check
and make sure that your 3G/4G USB modem is on our Compatibility
List.
If your 3G/4G USB modem is on our list but the router shows 2)
"Unknown Modem", please go to our website to download the latest
rmware or bin le and upgrade the Router.
If the latest rmware or bin le cannot support your modem, please 3)
contact our technical support.

Other manuals for TP-Link TL-MR3220

Related product manuals