TL-R402M Cable/DSL Router User Guide
18
addresses to the router during login, click “Use the following DNS servers” checkbox and
enter the IP address in dotted-decimal notation of your ISP’s primary DNS server. If a
secondary DNS server address is available, enter it as well.
Click the Save button to save your settings
4. If you choose L2TP, you should enter the following parameters (Figure 4-8):
Figure 4-8 WAN – L2TP
For more details, please refer to your ISP.
¾ User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive
¾ Connect/Disconnect - Click the button, you can handle the on-line connection or
disconnection
¾ Dynamic IP/Static IP - Enter the IP address in dotted-decimal notation provided by your ISP
¾ Server IP Address/Name - Please type the correct Server IP Address/Name which your
ISP provided
¾ MTU Size (in bytes) - The default value is 1460, which is usually fine. For some ISPs, you
To Next Page
Loading...
