Configuration Guide 116
Configuring Behavior Control Configuration Examples
Figure 3-3 Configure IP Group
3) Choose the menu Behavior Control > Web Filtering > Web Group to load the configuration
page, and click Add. Specify a name “RD_Filtering” for this web group and add the member
“www.tp-link.com”. Click OK.
Figure 3-4 Configure Web Group
4) Choose the menu Behavior Control > Web Filtering > Web Group Filtering to load the
configuration page, and click Add. Select “RD_Dept” as the IP Group, “Whitelist” as the
Policy, “RD_Filtering“ as the Web Group, and “Any” as the Effective Time. Click OK.
This rule means that the hosts in the R&D department are allowed to access the website
www.tp-link.com at any time.
To Next Page
Loading...
