Configuring Authentication Radius Authentication Configuration
Configuration Guide
131
3
Radius Authentication Configuration
To configure Radius Authentication, follow the steps:
1) Configure the authentication page.
2) Specify the external Radius server and configure the corresponding parameters.
3.1 Configuring Radius Authentication
Choose the menu Authentication > Authentication Settings > Web Authentication to
load the following page.
Figure 3-1 Configuring the Radius Authentication
Follow these steps to configure Radius Authentication:
1) In the Settings section, enable the authentication status, configure the idle timeout and
portal authentication port.
Status Check the box to enable portal authentication.
To Next Page
Loading...
