Configuration Guide 4
Viewing Status Information Traffic Statistics
2
Traffic Statistics
Traffic Statistics displays detailed information relating to the data traffic of interfaces and
IP addresses. You can monitor the traffic and locate faults according to this information.
With the Traffic Statistics function, you can:
View the traffic statistics on each interface.
Specify an IP address range, and view the traffic statistics of the IP addresses in this
range.
2.1 Viewing the Interface Statistics
Choose the menu Status > Traffic Statistics > Interface Statistics to load the following
page.
Figure 2-1 Interface Statistics
View the detailed traffic information of each interface in the statistics list.
TX Rate (KB/s) Displays the rate for transmitting data in kilobytes per second.
RX Rate (KB/s) Displays the rate for receiving data in kilobytes per second.
TX Packet Rate
(Pkt/s)
Displays the rate for transmitting data in packets per second.
RX Packet Rate
(Pkt/s)
Displays the rate for receiving data in packets per second.
Total TX Bytes Displays the bytes of packets transmitted on the interface.
Total RX Bytes Displays the bytes of packets received on the interface.
Total TX Packets Displays the number of packets transmitted on the interface.
To Next Page
Loading...
