Configuration Guide 118
Configuring Behavior Control Configuration Examples
3
Configuration Examples
3.1 Example for Access Control
3.1.1 Network Requirements
In the diagram below, the R&D and some other departments are connected to a layer 2 switch
and access the internet via the router. For data security purposes, it is required that the R&D
department users can only visit the official website of the company, for example: http://www.tp-
link.com. For other departments, there is no limitation of website access.
Figure 3-1 Network Topology
R
Layer 2 Switch
Router
LAN
192.168.0.1/24
WAN
1.1.1.2
Internet
R&D Department
192.168.0.10/24-192.168.0.120/24
Other Departments
3.1.2 Configuration Scheme
We can configure Web Filtering to limit the website access of the specific hosts. Both Web
Group Filtering and URL Filtering can achieve this. In this example, the configuration difference
between Web Group Filtering and URL Filtering is as follows:
To Next Page
Loading...
