Configuration Guide 164
Configuring Authentication Local Authentication Configuration
Maximum Users Specify the maximum number of users that are allowed use this account to
authenticate.
Note: If the MAC Binding Type is either Static Binding or Dynamic Binding, only one
client can use this username and password to authenticate,i.e., the bound client,
even if the value of Maximum Users is configured to be greater than one.
Upstream
Bandwidth /
Downstream
Bandwidth
Optional. Specify the upstream / downstream bandwidth for the user. 0 means no
limit.
Name Optional. Record the user's name.
Telephone Optional. Record the user's telephone number.
Description Optional. Enter a brief description for the user.
Status Check the box to enable this account.
Configuring the Free User Account
Choose the menu Authentication > User Management > User Management and click Add
to load the following page.
Figure 2-3 Configuring the Free User Account
Specify the user type, configure the username and password for the free user account, and
configure the other corresponding parameters. Then click OK.
User Type Specify the user type as Free User.
To Next Page
Loading...
