Configuration Guide 166
Configuring Authentication RADIUS Authentication Configuration
3
RADIUS Authentication Configuration
To configure RADIUS Authentication, follow the steps:
1) Configure the authentication page.
2) Specify the external RADIUS server and configure the corresponding parameters.
3.1 Configuring RADIUS Authentication
Choose the menu Authentication > Authentication Settings > Web Authentication to
load the following page. Please make sure that the Authentication Type is configured as
Radius Authentication.
Figure 3-1 Configuring RADIUS Authentication
Follow these steps to configure RADIUS Authentication:
1) In the Settings section, enable the authentication status, configure the idle timeout and
portal authentication port.
To Next Page
Loading...
