Configuration Guide 172
Configuring Authentication Guest Resources Configuration
Figure 5-1 Configuring the Five Tuple Type
Specify the client and the network resources the client can visit by configuring the IP
address, MAC address and service port, then click OK.
Name Enter the name of the guest resource entry.
Type Choose the guest resource type as Five Tuple Type.
Source IP Range Specify the IP range of the client(s) by entering the network address and subnet
mask bits. Only the specified clients can visit the guest resources.
Destination IP
Range
Specify the IP range of the server(s) that provides the guest resources by entering
the network address and subnet mask bits.
Source MAC
Address
Enter the MAC address of the client.
Source Port
Range
Enter the source service port range.
Destination Port
Range
Enter the destination service port range.
Description Enter a brief description for the Guest Resources entry to make it easier to search
and manage.
Protocol Specify the protocol as TCP or UDP for the Guest Resources.
Status Check the box to enable the guest resource entry.
To Next Page
Loading...
