System Tools Diagnostics
Configuration Guide
199
Destination IP/
Domain Name
Enter the IP address or the domain name that you want to ping or tracert.
Interface Select the interface that sends the detection packets.
2) (Optional) Click Advanced and the following section will appear.
Figure 5-2 Advanced Parameters for Ping Method
Ping Count Specify the count of the test packets to be sent during the ping process.
Ping Packet Size Specify the size of the test packets to be sent during the ping process.
3) Click Start.
5.1.2 Configuring Traceroute
Choose the menu System Tools > Diagnostics > Diagnostics to load the following page.
Figure 5-3 Configuring Diagnostics
Follow these steps to configure Diagnostics:
To Next Page
Loading...
