TP-Link TL-R600VPN - 6 Time Settings

System Tools Time Settings
Configuration Guide
201
6
Time Settings
In Time Settings module, you can configure the following features:

System Time

Daylight Saving Time
6.1 Setting the System Time
Choose one method to set the system time.
6.1.1 Getting time from the Internet Automatically
Choose the menu System Tools > Time Settings > Time Settings to load the following
page.
Figure 6-1 Getting Automatically from the Internet
In the Time Settings section, configure the following parameters and click Save.
Current Time Displays the current system time.
Time Config Select Get automatically from the Internet to get the system time from the NTP
server.
Time Zone Select the time zone the device is in.
Primary NTP
Server
Enter the IP address of the Primary NTP server.
Secondary NTP
Server
Enter the IP address of the Secondary NTP server.