71
¾ Use the same time schedule every day: When this is checked, the Start time and End time set to
Mon (Monday) are applied to all days. In this case, the Start time and End time of the other days
than Mon (Monday) cannot be input.
8.9 Alarm Input
When you click Alarm Input on the setting-advanced menu, the Setting menu appears. You can set in
this menu to control the external alarm input of I / O port on the rear of the device linked to FTP, SMTP,
and HTTP sending function.
¾ Alarm input 1: Click it on for using external sensor which is connected to Alarm input1 of the
camera I/O port.
z Trigger condition: Select High signal output and Low signal output as your alarm.
z Camera move: Pull down the window to select the camera preset position. When external
alarm input happens, the camera will automatically move to that position.
8.10 Motion Detection
There are three Motion Detection functions as sensors to set for different detecting zones. Each one has
Threshold and Sensitivity inputs which you can adjust to specific zone sequentially. Motion Detection
function can support to FTP, SMTP and Alarm output for capturing and sending images or starting alarm
output.
To Next Page
Loading...
