TP-Link TL-SF1024D - Product Introduction; Product Overview; Features

10/100Mbps Unmanaged Switch
03Introduction
LEDs
LED Status Indication
Power
On The switch is powered on
Off
The switch is powered off or power supply is
abnormal
Flashing Power supply is abnormal
Link/Act
On A device is linked to the corresponding port
Flashing Data is being transmitted or received
Off
There is no device linked to the corresponding
port
100Mbps
On The corresponding port is running at 100Mbps
Off
There is no device linked to the corresponding
port or the port is running at 10Mbps
Note:
Because of the dierence among the switch models, some switches don’t have
the 100Mbps indicator, such as TL-SF1048, TL-SF1016DS and TL-SF1024D
switch.
10/100Mbps RJ45 Port
Designed to connect to the device with a bandwidth of 10Mbps or 100Mbps. Each
has a corresponding 10/100Mbps LED.
■
Rear Panel
The rear panel of the switch is shown as the following figure.
Figure 1-6 Rear Panel
Power
Socket
Grounding
Terminal
Grounding Terminal
The switch already comes with lightning protection mechanism. You can also ground
the switch through the PE (Protecting Earth) cable of AC cord or with Ground Cable.
For detailed information, please refer to Chapter 3 Lightning Protection.