179
13.4.2 Port Config
On this page you can configure all ports' LLDP-MED parameters.
Choose the menu LLDP→LLDP-MED→Port Config to load the following page.
Figure 13-7 LLDP-MED Port Configuration
The following entries are displayed on this screen:
LLDP-MED Port Config
Port Select: Select the desired port to configure.
LLDP-MED Status: Configure the port's LLDP-MED status:
Enable: Enable the port's LLDP-MED status, and the port's Admin
Status will be changed to Tx&Rx.
Disable: Disable the port's LLDP-MED status.
Included TLVs: Select TLVs to be included in outgoing LLDPDU.
Click the Detail button to display the included TLVs and select the
desired TLVs.
To Next Page
Loading...
