TP-Link TL-SG2424P - 1.4.2 Special Characters; 1.4.3 Parameter Format

7
 Bold indicates an unalterable keyword. For example: show logging
 Normal Font indicates a constant (several options are enumerated and only one can be
selected). For example: switchport type { access | trunk | general }
 Italic Font indicates a variable (an actual value must be assigned). For example: bridge
aging-time aging-time
1.4.2 Special Characters
You should pay attentions to the description below if the variable is a character string:
 These six characters ” < > , \ & can not be input.
 If a blank is contained in a character string, single or double quotation marks should be used,
for example ’hello world’, ”hello world”, and the words in the quotation marks will be identified
as a string. Otherwise, the words will be identified as several strings.
1.4.3 Parameter Format
Some parameters must be entered in special formats which are shown as follows:
 MAC Address must be entered in the format of xx:xx:xx:xx:xx:xx
 One or several values can be typed for a port-list or a vlan-list using comma to separate. Use
a hyphen to designate a range of values, for instance 1, 3-5,7 indicates choosing 1,3,4,5,7.
 The port number should format as 1/0/3, meaning unit/slot/port. The unit number is always 1,
and slot number is always 0 and the port number is a variable (an actual value must be
assigned).