55
system-time dst predefined
Description
The system-time dst predefined command is used to select a predefined DST
configuration and the configuration can be recycled.
Syntax
system-time dst predefined [ USA | Australia | Europe | New-Zealand ]
Parameter
USA | Australia | Europe | New-Zealand —— Predefined DST mode, with four
options: USA, Australia, Europe and New-Zealand. By default, the setting is
“Europe”.
The DST time periods which the four predefined DST mode represents are
displayed as follow:
USA: First Sunday in April, 02:00 ~ Last Sunday in October, 02:00.
Australia: First Sunday in October, 02:00 ~ First Sunday in April, 03:00.
Europe: Last Sunday in March, 01:00 ~ Last Sunday in October, 01:00.
New Zealand: First Sunday in October, 02:00 ~ Last Sunday in March, 03:00.
Command Mode
Global Configuration Mode
Example
Configure the DST period of the switch as Europe:
TL-SG2424P(config)# system-time dst predefined Europe
system-time dst date
Description
The system-time dst date command is used to specify the DST configuration
in Date mode. This configuration is one-off in use. By default, the current year is
used as the starting time. The month to end can carry forward to next year, but
the length of DST time should be less than 12 months.
Syntax
system-time dst date { smonth } { sday } { stime } { emonth } { eday } { etime }
[ offset ]
To Next Page
Loading...
