56
Parameter
smonth —— Month to start, with the options: Jan, Feb, Mar, Apr, May, Jun, Jul,
Aug, Sep, Oct, Nov, Dec
sday
——
Day to start, ranging from 1 to 31. Please mind that the number of
days depends on the month.
stime —— Time to start, in the format of hh:mm.
emonth —— Month to end, with the options: Jan, Feb, Mar, Apr, May, Jun, Jul,
Aug, Sep, Oct, Nov, Dec
eday —— Day to end, ranging from 1 to 31. Please mind that the number of
days depends on the month.
etime —— Time to end, in the format of hh:mm.
offset —— Specify the time adding in minutes when Daylight Saving Time
comes. The range of value depends and the default value is 60 minutes. It is
optional.
Command Mode
Global Configuration Mode
Example
Configure the DST start time as 00:00 am on April 1
st
, the end time as 00:00 am
on October 1
st
and the offset as 30 minutes:
TL-SG2424P(config)# system-time dst date Apr 1 00:00 Oct 1 00:00 30
system-time dst recurring
Description
The system-time dst recurring command is used to specify the DST
configuration in recurring mode. This configuration is recurring in use. The
month to end can carry forward to next year, but the time length should be less
than 12 months.
Syntax
system-time dst recurring { sweek } { sday } { smonth } { stime } { eweek }
{ eday } { emonth } { etime } [ offset ]
Parameter
sweek
——
Week to start, with the options: first, second, third, fourth, last.
sday
——
Day to start, with the options: Sun, Mon, Tue, Wed, Thu, Fri, Sat.
To Next Page
Loading...
