61
Parameter
ip-addr —— IP Address of the TFTP server.
name —— Specify the name for the configuration file which would be downloaded.
Command Mode
Privileged EXEC Mode
Example
Download the configuration file named as config.cfg to the switch from TFTP
server with the IP 192.168.0.148:
TL-SG2424P# copy startup-config tftp ip-address 192.168.0.148 filename
config.cfg
firmware upgrade
Description
The firmware upgrade command is used to upgrade the switch system file via
the TFTP server.
Syntax
firmware upgrade ip-address ip-addr filename name
Parameter
ip-addr —— IP Address of the TFTP server.
name —— Specify the name for the firmware file.
Command Mode
Privileged EXEC Mode
Example
Upgrade the switch system file named as firmware.bin via the TFTP server with
the IP address 192.168.0.148:
TL-SG2424P# firmware upgrade ip-address 192.168.0.148 filename
firmware.bin
ping
Description
To Next Page
Loading...
