Configuring DHCP Service Appendix: Default Parameters
User Guide 499
Parameter Default Setting
DHCP VLAN Relay
Interface ID None
VLAN ID None
Server Address None
Default settings of DHCP L2 Relay are listed in the following table.
Table 6-3 Default Settings of DHCP L2 Relay
Parameter Default Setting
Global Config
DHCP Relay Disabled
VLAN Status Disabled
Port Config
Option 82 Support Disabled
Option 82 Policy Keep
Format Normal
Circuit ID Customization Disabled
Circuit ID None
Remote ID Customization Disabled
Remote ID None
To Next Page
Loading...
