User Guide 906
Configuration ExampleConfiguring SNMP & RMON
Index Port Owner State
----- ---------- --------- -------
1 Gi1/0/1 monitor valid
2 Gi1/0/2 monitor valid
Verify RMON history configurations:
Switch_A(config)#show rmon history
Index Port Interval Buckets Owner State
----- --------- -------- --------- ---------- ---------
1 Gi1/0/1 100 50 monitor Enable
2 Gi1/0/2 100 50 monitor Enable
Verify RMON event configurations:
Switch_A(config)#show rmon event
Index User Description Type Owner State
----- ------ ----------- -------- ---------- ----------
1 admin rising_notify Notify monitor Enable
2 admin falling_log Log monitor Enable
Verify RMON alarm configurations:
Switch_A(config)#show rmon alarm
Index-State: 1-Enabled
Statistics index: 1
Alarm variable: RevPkt
Sample Type: Absolute
RHold-REvent: 3000-1
FHold-FEvent: 2000-2
Alarm startup: All
Interval: 10
Owner: monitor
To Next Page
Loading...
