show gvrp configuration
The show gvrp configuration User EXEC mode command displays GVRP configuration information, including
timer values, whether GVRP and dynamic VLAN creation is enabled, and which ports are running GVRP.
Syntax
show gvrp configuration [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — A valid Ethernet port. (Full syntax: port)
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays GVRP configuration information:
Console>
show gvrp configuration
GVRP Feature is currently enabled on the device.
Timers (milliseconds)
Port(s) Status Registration Dynamic VLAN
Creation
Join Leave Leave All
------ ------- ------------ ----------- ---- ----- ---------
1 Enabled Normal Enabled 200 600 10000
4 Enabled Normal Enabled 200 600 10000
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
To Next Page
Loading...
