TP-Link TL-SG3109 - Show Ip Igmp Snooping Interface

show ip igmp snooping interface
The show ip igmp snooping interface User EXEC mode command displays IGMP snooping configuration.
Syntax
show ip igmp snooping interface vlan-id
Parameters
•
vlan-id — VLAN number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays IGMP snooping information on VLAN 1000.
Console> show ip igmp snooping interface 1000
IGMP Snooping is globaly enabled
IGMP Snooping is enabled on VLAN 1000
IGMP host timeout is 300 sec
IGMP Immediate leave is disabled. IGMP leave timeout is 10 sec
IGMP mrouter timeout is 200 sec
Automatic learning of multicast router ports is enabled
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 112