TP-Link TL-SG3109 - Show Ip Igmp Snooping Groups

show ip igmp snooping groups
The show ip igmp snooping groups User EXEC mode command displays multicast groups learned by IGMP
snooping.
Syntax
show ip igmp snooping groups [vlan vlan-id] [address ip-multicast-address]
Parameters
•
vlan-id — VLAN number.
• ip-multicast-address — IP multicast address.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
To see the full multicast address table (including static addresses) use the show bridge multicast address-table
Privileged EXEC command.
Example
The following example shows IGMP snooping information on multicast groups.
Console> show ip igmp snooping groups
Vlan IP Address Querier Ports
---- ----------------- ------- ----------
1 224-239.130|2.2.3 Yes 1, 2
8 224-239.130|2.2.8 Yes 3-5
IGMP Reporters that are forbidden statically:
---------------------------------------------
Vlan IP Address Ports
---- ----------------- -----
1 224-239.130|2.2.3 7
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 113