TP-Link TL-SG3109 - Section 11. Line Commands; Line

Section 11. Line Commands
line
The line Global Configuration mode command identifies a specific line for configuration and enters the Line Con-
figuration command mode.
Syntax
line {console | telnet | ssh}
Parameters
•
console — Console terminal line.
• telnet — Virtual terminal for remote console access (Telnet).
• ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example configures the device as a virtual terminal for remote console access.
Console(config)# line telnet
Console(config-line)#
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 134