speed
The speed Line Configuration mode command sets the line baud rate. To return to the default configuration, use
the no form of the command.
Syntax
speed bps
no speed
Parameters
•
bps—Baud rate in bits per second (bps). Possible values are 2400, 4800, 9600, 19200 and 38400.
Default Configuration
The default speed is 38400 bps.
Command Mode
Line Configuration (console) mode.
User Guidelines
This command is available only on the line console.
Examples
The following example configures the line baud rate to 38400.
Console(config)#
line console
Console(config-line)#
speed
38400
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
To Next Page
Loading...
