TP-Link TL-SG3109 - Show Management Access-Class

show management access-class
The show management access-class Privileged EXEC mode command displays the active management
access list.
Syntax
show management access-class
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about the active management access list.
Console# show management access-class
Management access-class is enabled, using access list mlist
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 148