show interfaces port-channel
The show interfaces port-channel Privileged EXEC mode command displays port-channel information.
Syntax
show interfaces port-channel [port-channel-number]
Parameters
•
port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information on all port-channels.
Console#
show interfaces port-channel
Channel Ports
------- ---------------------------------
1 Active: 1, 2
2 Active: 2, 7 Inactive: 1
3 Active: 3, 8
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
To Next Page
Loading...
