Section 16. QoS Commands
qos
The qos Global Configuration mode command enables quality of service (QoS) on the device. To disable QoS on
the device, use the no form of this command.
Syntax
qos
no qos
Default Configuration
QoS is disabled on the device.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables QoS on the device.
Console(config)#
qos
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
To Next Page
Loading...
