radius-server deadtime
The radius-server deadtime Global Configuration mode command improves RADIUS response time when serv-
ers are unavailable. The command is used to cause the unavailable servers to be skipped. To return to the default
configuration, use the no form of this command.
Syntax
radius-server deadtime deadtime
no radius-server deadtime
Parameters
•
deadtime — Length of time in minutes during which a RADIUS server is skipped over by transaction
requests. (Range: 0 - 2000)
Default Configuration
The deadtime setting is 0.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the deadtime to 10 minutes.
Console(config)# radius-server deadtime 10
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
To Next Page
Loading...
