TP-Link TL-SG3109 - Snmp-Server Enable Traps

snmp-server enable traps
The snmp-server enable traps Global Configuration mode command enables the device to send SNMP traps. To
disable SNMP traps, use the no form of the command.
Syntax
snmp-server enable traps
no snmp-server enable traps
Default Configuration
SNMP traps are enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables SNMP traps.
Console(config)# snmp-server enable traps
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 204