snmp-server location
The snmp-server location Global Configuration mode command configures the system location string. To
remove the location string, use the no form of this command.
Syntax
snmp-server location text
no snmp-server location
Parameters
•
text — Specifies a string that describes system location information. (Range: 0-160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Do not include spaces in the text string or place text that includes spaces inside quotation marks.
Example
The following example defines the device location as New_York.
Console(config)# snmp-server location New_York
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
To Next Page
Loading...
