TP-Link TL-SG3109 - Name (Mst)

name (mst)
The name MST Configuration mode command defines the configuration name. To return to the default setting,
use the no form of this command.
Syntax
name string
Parameters
•
string—MST configuration name. Case-sensitive (Range: 1-32 characters).
Default Configuration
The default name is a bridge ID.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines the configuration name as region1.
Console(config) # spanning-tree mst configuration
Console(config-mst) # name region 1
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 241